Synthetic Assembly DNA Cloning to Build Plasmids for Multiplexed Transgenic Selection, Counterselection or Any Other Genetic Strategies Using Drosophila melanogaster.

We recently described a drug-based selectable and counterselectable genetic platform for the animal model system Drosophila melanogaster, consisting of four resistance and two sensitivity markers that allow direct selection for, or counterselection against, a desired genotype. This platform eliminates the need to identify modified progeny by traditional laborious screening using the dominant eye and body color markers, white+ and yellow+ , respectively. The four resistance markers permit selection of animals using G418 sulfate, puromycin HCl, blasticidin S, or hygromycin B, while the two sensitivity markers allow counterselection of animals against ganciclovir or acyclovir and 5-fluorocytosine. The six markers can be used alone or in combination to perform co-selection, combination selection, and counterselection, as well as co-counterselection. To make this novel selection and counterselection genetics platform easily accessible to and rapidly implementable by the scientific community, we used a synthetic assembly DNA cloning platform, GoldenBraid 2.0 (GB2.0). GB2.0 relies on two Type IIs restriction enzymes that are alternatingly used during successive cloning steps to make increasingly complex genetic constructs. Here we describe, as an example, how to perform synthetic assembly DNA cloning using GB2.0 to build such complex plasmids via the assembly of both components of the binary LexA/LexA-Op overexpression system, a G418 sulfate-selectable LexA transactivator plasmid, and a blasticidin S-selectable LexA-Op responder plasmid. We demonstrate the functionality of these plasmids by including the expression pattern obtained after co-injection, followed by co-selection using G418 sulfate and blasticidin S, resulting in co-transgenesis of both plasmids. Protocols are provided on how to obtain, adapt, and clone DNA parts for synthetic assembly cloning after de novo DNA synthesis or PCR amplification of desired DNA parts and how to assemble those DNA parts into multipartite transcription units, followed by how to further assemble multiple transcription units into genetic constructs of increasing complexity to perform multiplexed transgenic selection and counterselection, or any other genetic strategies using Drosophila melanogaster. The protocols we present can be easily adapted to incorporate any of the six selectable and counterselectable markers, or any other, markers, to generate plasmids of unmatched complexity for various genetic applications. A protocol on how to generate transgenic animals using these synthetically assembled plasmids is described in an accompanying Current Protocols article (Venken, Matinyan, Gonzalez, & Dierick, 2023). © 2023 Wiley Periodicals LLC. Basic Protocol 1: Obtaining and cloning a de novo-synthesized DNA part for synthetic assembly DNA cloning Basic Protocol 2: Obtaining and cloning a DNA part amplified by PCR from existing DNA resources for synthetic assembly DNA cloning Alternate Protocol: Obtaining, adapting, and cloning a DNA part amplified by PCR from existing DNA resources for synthetic assembly DNA cloning Basic Protocol 3: Synthetic assembly DNA cloning of individual DNA parts into a multipartite transcription unit Basic Protocol 4: Synthetic assembly DNA cloning of multiple transcription units into genetic constructs of increasing complexity.

Synthetic Assembly DNA Cloning of Multiplex Hextuple Luciferase Reporter Plasmids.

Multiplex hextuple luciferase assaying allows monitoring the activity of five experimental pathways against one control at the same time. To perform multiplex hextuple luciferase assaying, six orthogonal luciferase reporter units are needed of which five are pathway-specific and one acts as a control for normalization. To ensure stoichiometric delivery of all six luciferase reporters in every transfected cell, synthetic assembly DNA cloning is used to stitch together all six luciferase reporter units into a single vector. Here, we provide a detailed three-step synthetic assembly DNA protocol to generate multiplex hextuple luciferase reporter plasmids for any five cellular signaling pathways of interest, against a control normalization pathway. A first protocol is provided on how to generate plasmids that contain novel transcription factor-binding motifs for specific transcription factors. A second protocol details on how to couple these novel transcription factor-binding motifs to one of five orthogonal luciferases to obtain specific luciferase reporters for cellular signaling pathways acting upstream of those transcription factor-binding motifs. Finally, a third protocol provides details on how to assemble orthogonal luciferase reporters for five cellular signaling pathways acting upstream of five unique transcription factor-binding motifs together with a control constitutive pathway luciferase reporter that will be used for normalization to obtain a final multiplex hextuple luciferase vector.

Multiplex Hextuple Luciferase Assaying.

We recently expanded the commonly used dual luciferase assaying method toward multiplex hextuple luciferase assaying, allowing monitoring the activity of five experimental pathways against one control at the same time. In doing so, while our expanded assay utilizes a total of six orthogonal luciferases instead of two, this assay, conveniently, still utilizes the well-established reagents and principles of the widely used dual luciferase assay. Three quenchable D-luciferin-consuming luciferases are measured after addition of D-Luciferin substrate, followed by quenching of their bioluminescence (BL) and the measurement of three coelenterazine (CTZ)-consuming luciferases after addition of CTZ substrate, all in the same vessel. Here, we provide detailed protocols on how to perform such multiplex hextuple luciferase assaying to monitor cellular signal processing upstream of five transcription factors and their corresponding transcription factor-binding motifs, using a constitutive promoter as normalization control. The first protocol is provided on how to perform cell culture in preparation toward genetic or pharmaceutical perturbations, as well as transfecting a multiplex hextuple luciferase reporter vector encoding all luciferase reporter units needed for multiplex hextuple luciferase assaying. The second protocol details on how to execute multiplex hextuple luciferase assaying using a microplate reader appropriately equipped to detect the different BLs emitted by all six luciferases. Finally, the third protocol provides details on analyzing, plotting, and interpreting the data obtained by the microplate reader.

Human pancreatic microenvironment promotes ß-cell differentiation via non-canonical WNT5A/JNK and BMP signaling.

In vitro derivation of pancreatic ß-cells from human pluripotent stem cells holds promise as diabetes treatment. Despite recent progress, efforts to generate physiologically competent ß-cells are still hindered by incomplete understanding of the microenvironment's role in ß-cell development and maturation. Here, we analyze the human mesenchymal and endothelial primary cells from weeks 9-20 fetal pancreas and identify a time point-specific microenvironment that permits ß-cell differentiation. Further, we uncover unique factors that guide in vitro development of endocrine progenitors, with WNT5A markedly improving human ß-cell differentiation. WNT5A initially acts through the non-canonical (JNK/c-JUN) WNT signaling and cooperates with Gremlin1 to inhibit the BMP pathway during ß-cell maturation. Interestingly, we also identify the endothelial-derived Endocan as a SST+ cell promoting factor. Overall, our study shows that the pancreatic microenvironment-derived factors can mimic in vivo conditions in an in vitro system to generate bona fide ß-cells for translational applications.

Multiplexed drug-based selection and counterselection genetic manipulations in Drosophila.

The power of Drosophila melanogaster as a model system relies on tractable germline genetic manipulations. Despite Drosophila's expansive genetics toolbox, such manipulations are still accomplished one change at a time and depend predominantly on phenotypic screening. We describe a drug-based genetic platform consisting of four selection and two counterselection markers, eliminating the need to screen for modified progeny. These markers work reliably individually or in combination to produce specific genetic outcomes. We demonstrate three example applications of multiplexed drug-based genetics by generating (1) transgenic animals, expressing both components of binary overexpression systems in a single transgenesis step; (2) dual selectable and counterselectable balancer chromosomes; and (3) selectable, fluorescently tagged P[acman] bacterial artificial chromosome (BAC) strains. We perform immunoprecipitation followed by proteomic analysis on one tagged BAC line, demonstrating our platform's applicability to biological discovery. Lastly, we provide a plasmid library resource to facilitate custom transgene design and technology transfer to other model systems.

A novel statistical method for interpreting the pathogenicity of rare variants.

PURPOSE: To achieve the ultimate goal of personalized treatment of patients, accurate molecular diagnosis and precise interpretation of the impact of genetic variants on gene function is essential. With sequencing cost becoming increasingly affordable, the accurate distinguishing of benign from pathogenic variants becomes the major bottleneck. Although large normal population sequence databases have become a key resource in filtering benign variants, they are not effective at filtering extremely rare variants. METHODS: To address this challenge, we developed a novel statistical test by combining sequencing data from a patient cohort with a normal control population database. By comparing the expected and observed allele frequency in the patient cohort, variants that are likely benign can be identified. RESULTS: The performance of this new method is evaluated on both simulated and real data sets coupled with experimental validation. As a result, we demonstrate this new test is well powered to identify benign variants, and is particularly effective for variants with low frequency in the normal population. CONCLUSION: Overall, as a general test that can be applied to any type of variants in the context of all Mendelian diseases, our work provides a general framework for filtering benign variants with very low population allele frequency.

Rapid and Efficient Synthetic Assembly of Multiplex Luciferase Reporter Plasmids for the Simultaneous Monitoring of Up to Six Cellular Signaling Pathways.

High-throughput cell-based screening assays are valuable tools in the discovery of chemical probes and therapeutic agents. Such assays are designed to examine the effects of small compounds on targets, pathways, or phenotypes participating in normal and disease processes. While most cell-based assays measure single quantities, multiplexed assays seek to address these limitations by obtaining multiple simultaneous measurements. The signals from such measurements should be independently detectable and cover large dynamic ranges. Luciferases are good candidates for generation of such signals. They are genetically encoded, versatile, and cost-effective, and their output signals can be sensitively detected. We recently developed a multiplex luciferase assay that allows monitoring the activity of five experimental pathways against one control simultaneously. We used synthetic assembly cloning to assemble all six luciferase reporter units into a single vector over eight stitching rounds. Because all six reporters are on a single piece of DNA, a single vector ensures stoichiometric ratios of each transcriptional unit in each transfected cell, resulting in lower experimental variation. Our proof-of-concept multiplex hextuple luciferase assay was designed to simultaneously monitor the p53, TGF-ß, NF-κß, c-Myc, and MAPK/JNK signaling pathways. The same synthetic assembly cloning pipeline allows the stitching of numerous other cellular pathway luciferase reporters. Here we present an improved three-step synthetic assembly protocol to quickly and efficiently generate multiplex hextuple luciferase reporter plasmids for other signaling pathways of interest. This improved assembly protocol provides the opportunity to analyze any five desired pathways at once much more quickly. Protocols are provided on how to prepare DNA components and destination vector plasmids, design synthetic DNA, perform assembly cloning of new transcriptional reporter elements, implement multipartite synthetic assembly cloning of single-pathway luciferase reporters, and carry out one-step assembly of final multiplex hextuple luciferase vectors. We present protocols on how to perform multiplex hextuple luciferase in an accompanying Current Protocols in Molecular Biology article. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Preparation of DNA parts and destination vectors for synthetic assembly cloning Basic Protocol 2: DNA synthesis and assembly cloning of a typical transcriptional reporter element Alternate Protocol: DNA synthesis and assembly cloning of a challenging transcriptional reporter element Basic Protocol 3: Multipartite synthetic assembly cloning of individual pathway luciferase reporters Basic Protocol 4: One step assembly into final multiplex hextuple luciferase vectors Support Protocol: Generation of home-made chemocompetent E. coli DH10B-T1R cells.

Simultaneous Examination of Cellular Pathways using Multiplex Hextuple Luciferase Assaying.

Multiplex experimentation that can assay multiple cellular signaling pathways in the same cells requires orthogonal genetically encoded reporters that report over large dynamic ranges. Luciferases are cost-effective, versatile candidates whose output signals can be sensitively detected in a multiplex fashion. Commonly used dual luciferase reporter assays detect one luciferase that is coupled to a single cellular pathway and a second that is coupled to a control pathway for normalization purposes. We have expanded this approach to multiplex hextuple luciferase assays that can report on five cellular signaling pathways and one control, each of which is encoded by a unique luciferase. Light emission by the six luciferases can be distinguished by the use of two distinct substrates, each specific for three luciferases, followed by spectral decomposition of the light emitted by each of the three luciferase enzymes with bandpass filters. Here, we present detailed protocols on how to perform multiplex hextuple luciferase assaying to monitor pathway fluxes through transcriptional response elements for five specific signaling pathways (i.e., c-Myc, NF-κß, TGF-ß, p53, and MAPK/JNK) using the constitutive CMV promoter as normalization control. Protocols are provided for preparing reporter vector plasmids for multiplex reporter assaying, performing cell culture and multiplex luciferase reporter vector plasmid transfection, executing multiplex luciferase assays, and analyzing and interpreting data obtained by a plate reader appropriately equipped to detect the different luminescences. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Preparation of vectors for multiplex hextuple luciferase assaying Basic Protocol 2: Cell culture work for multiplex hextuple luciferase assays Basic Protocol 3: Transfection of luciferase reporter plasmids followed by drug and recombinant protein treatments Basic Protocol 4: Performing the multiplex hextuple luciferase assay.

A GoldenBraid cloning system for synthetic biology in social amoebae.

GoldenBraid is a rapid, modular, and robust cloning system used to assemble and combine genetic elements. Dictyostelium amoebae represent an intriguing synthetic biological chassis with tractable applications in development, chemotaxis, bacteria-host interactions, and allorecognition. We present GoldenBraid as a synthetic biological framework for Dictyostelium, including a library of 250 DNA parts and assemblies and a proof-of-concept strain that illustrates cAMP-chemotaxis with four fluorescent reporters coded by one plasmid.

Multigene Engineering by GoldenBraid Cloning: From Plants to Filamentous Fungi and Beyond.

Many synthetic biologists have adopted methods based on Type IIS restriction enzymes and Golden Gate technology in their cloning procedures, as these enable the combinatorial assembly of modular elements in a very efficient way following standard rules. GoldenBraid (GB) is a Golden Gate-based modular cloning system that, in addition, facilitates the engineering of large multigene constructs and the exchange of DNA parts as result of its iterative cloning scheme. GB was initially developed specifically for plant synthetic biology, and it has been subsequently extended and adapted to other organisms such as Saccharomyces cerevisiae, filamentous fungi, and human cells by incorporating a number of host-specific features into its basic scheme. Here we describe the general GB cloning procedure and provide detailed protocols for its adaptation to filamentous fungi-a GB variant known as FungalBraid. The assembly of a cassette for gene disruption by homologous recombination, a fungal-specific extension of the GB utility, is also shown. Development of FungalBraid was relatively straightforward, as both plants and fungi can be engineered using the same binary plasmids via Agrobacterium-mediated transformation. We also describe the use of a set of web-based tools available at the GB website that assist users in all cloning procedures. The availability of plant and fungal versions of GB will facilitate genetic engineering in these industrially relevant organisms. © 2020 by John Wiley & Sons, Inc. Basic Protocol 1: Software-assisted modular DNA assembly of a two gene expression-cassette with GB Basic Protocol 2: Agrobacterium tumefaciens-mediated transformation of filamentous fungi Basic Protocol 3: Software-assisted modular DNA assembly of a gene disruption-cassette using GB Basic Protocol 4: Obtaining disruption transformants.

Examining multiple cellular pathways at once using multiplex hextuple luciferase assaying.

Sensitive simultaneous assessment of multiple signaling pathways within the same cells requires orthogonal reporters that can assay over large dynamic ranges. Luciferases are such genetically encoded candidates due to their sensitivity, versatility, and cost-effectiveness. We expand luciferase multiplexing in post-lysis endpoint luciferase assays from two to six. Light emissions are distinguished by a combination of distinct substrates and emission spectra deconvolution. All six luciferase reporter units are stitched together into one plasmid facilitating delivery of all reporter units through a process we termed solotransfection, minimizing experimental errors. We engineer a multiplex hextuple luciferase assay to probe pathway fluxes through five transcriptional response elements against a control constitutive promoter. We can monitor effects of siRNA, ligand, and chemical compound treatments on their target pathways along with the four other probed cellular pathways. We demonstrate the effectiveness and adaptiveness of multiplex luciferase assaying, and its broad application across different research fields.

Metabolic engineering to simultaneously activate anthocyanin and proanthocyanidin biosynthetic pathways in Nicotiana spp.

Proanthocyanidins (PAs), or condensed tannins, are powerful antioxidants that remove harmful free oxygen radicals from cells. To engineer the anthocyanin and proanthocyanidin biosynthetic pathways to de novo produce PAs in two Nicotiana species, we incorporated four transgenes to the plant chassis. We opted to perform a simultaneous transformation of the genes linked in a multigenic construct rather than classical breeding or retransformation approaches. We generated a GoldenBraid 2.0 multigenic construct containing two Antirrhinum majus transcription factors (AmRosea1 and AmDelila) to upregulate the anthocyanin pathway in combination with two Medicago truncatula genes (MtLAR and MtANR) to produce the enzymes that will derivate the biosynthetic pathway to PAs production. Transient and stable transformation of Nicotiana benthamiana and Nicotiana tabacum with the multigenic construct were respectively performed. Transient expression experiments in N. benthamiana showed the activation of the anthocyanin pathway producing a purple color in the agroinfiltrated leaves and also the effective production of 208.5 nmol (-) catechin/g FW and 228.5 nmol (-) epicatechin/g FW measured by the p-dimethylaminocinnamaldehyde (DMACA) method. The integration capacity of the four transgenes, their respective expression levels and their heritability in the second generation were analyzed in stably transformed N. tabacum plants. DMACA and phoroglucinolysis/HPLC-MS analyses corroborated the activation of both pathways and the effective production of PAs in T0 and T1 transgenic tobacco plants up to a maximum of 3.48 mg/g DW. The possible biotechnological applications of the GB2.0 multigenic approach in forage legumes to produce "bloat-safe" plants and to improve the efficiency of conversion of plant protein into animal protein (ruminal protein bypass) are discussed.

GB3.0: a platform for plant bio-design that connects functional DNA elements with associated biological data.

Modular DNA assembly simplifies multigene engineering in Plant Synthetic Biology. Furthermore, the recent adoption of a common syntax to facilitate the exchange of plant DNA parts (phytobricks) is a promising strategy to speed up genetic engineering. Following this lead, here, we present a platform for plant biodesign that incorporates functional descriptions of phytobricks obtained under pre-defined experimental conditions, and systematically registers the resulting information as metadata for documentation. To facilitate the handling of functional descriptions, we developed a new version (v3.0) of the GoldenBraid (GB) webtool that integrates the experimental data and displays it in the form of datasheets. We report the use of the Luciferase/Renilla (Luc/Ren) transient agroinfiltration assay in Nicotiana benthamiana as a standard to estimate relative transcriptional activities conferred by regulatory phytobricks, and show the consistency and reproducibility of this method in the characterization of a synthetic phytobrick based on the CaMV35S promoter. Furthermore, we illustrate the potential for combinatorial optimization and incremental innovation of the GB3.0 platform in two separate examples, (i) the development of a collection of orthogonal transcriptional regulators based on phiC31 integrase and (ii) the design of a small genetic circuit that connects a glucocorticoid switch to a MYB/bHLH transcriptional activation module.

Genome engineering: Drosophila melanogaster and beyond.

A central challenge in investigating biological phenomena is the development of techniques to modify genomic DNA with nucleotide precision that can be transmitted through the germ line. Recent years have brought a boon in these technologies, now collectively known as genome engineering. Defined genomic manipulations at the nucleotide level enable a variety of reverse engineering paradigms, providing new opportunities to interrogate diverse biological functions. These genetic modifications include controlled removal, insertion, and substitution of genetic fragments, both small and large. Small fragments up to a few kilobases (e.g., single nucleotide mutations, small deletions, or gene tagging at single or multiple gene loci) to large fragments up to megabase resolution can be manipulated at single loci to create deletions, duplications, inversions, or translocations of substantial sections of whole chromosome arms. A specialized substitution of chromosomal portions that presumably are functionally orthologous between different organisms through syntenic replacement, can provide proof of evolutionary conservation between regulatory sequences. Large transgenes containing endogenous or synthetic DNA can be integrated at defined genomic locations, permitting an alternative proof of evolutionary conservation, and sophisticated transgenes can be used to interrogate biological phenomena. Precision engineering can additionally be used to manipulate the genomes of organelles (e.g., mitochondria). Novel genome engineering paradigms are often accelerated in existing, easily genetically tractable model organisms, primarily because these paradigms can be integrated in a rigorous, existing technology foundation. The Drosophila melanogaster fly model is ideal for these types of studies. Due to its small genome size, having just four chromosomes, the vast amount of cutting-edge genetic technologies, and its short life-cycle and inexpensive maintenance requirements, the fly is exceptionally amenable to complex genetic analysis using advanced genome engineering. Thus, highly sophisticated methods developed in the fly model can be used in nearly any sequenced organism. Here, we summarize different ways to perform precise inheritable genome engineering using integrases, recombinases, and DNA nucleases in the D. melanogaster. For further resources related to this article, please visit the WIREs website.

Elucidation of the first committed step in betalain biosynthesis enables the heterologous engineering of betalain pigments in plants.

Betalains are tyrosine-derived red-violet and yellow pigments, found in plants only of the Caryophyllales order. Although much progress has been made in recent years in the understanding of the betalain biosynthetic process, many questions remain open with regards to several of the proposed steps in the pathway. Most conspicuous by its absence is the characterization of the first committed step in the pathway, namely the 3-hydroxylation of tyrosine to form l-3,4-dihydroxyphenylalanine (l-DOPA). We used transcriptome analysis of the betalain-producing plants red beet (Beta vulgaris) and four o'clocks (Mirabilis jalapa) to identify a novel, betalain-related cytochrome P450-type gene, CYP76AD6, and carried out gene silencing and recombinant expression assays in Nicotiana benthamiana and yeast cells to examine its functionality. l-DOPA formation in red beet was found to be redundantly catalyzed by CYP76AD6 together with a known betalain-related enzyme, CYP76AD1, which was previously thought to only catalyze a succeeding step in the pathway. While CYP76AD1 catalyzes both l-DOPA formation and its subsequent conversion to cyclo-DOPA, CYP76AD6 uniquely exhibits only tyrosine hydroxylase activity. The new findings enabled us to metabolically engineer entirely red-pigmented tobacco plants through heterologous expression of three genes taking part in the fully decoded betalain biosynthetic pathway.

Software-assisted stacking of gene modules using GoldenBraid 2.0 DNA-assembly framework.

GoldenBraid (GB) is a modular DNA assembly technology for plant multigene engineering based on type IIS restriction enzymes. GB speeds up the assembly of transcriptional units from standard genetic parts and facilitates the stacking of several genes within the same T-DNA in few days. GBcloning is software-assisted with a set of online tools. The GBDomesticator tool assists in the adaptation of DNA parts to the GBstandard. The combination of GB-adapted parts to build new transcriptional units is assisted by the GB TU Assembler tool. Finally, the assembly of multigene modules is simulated by the GB Binary Assembler. All the software tools are available at www.gbcloning.org . Here, we describe in detail the assembly methodology to create a multigene construct with three transcriptional units for polyphenol metabolic engineering in plants.

Tomato PYR/PYL/RCAR abscisic acid receptors show high expression in root, differential sensitivity to the abscisic acid agonist quinabactin, and the capability to enhance plant drought resistance.

Abscisic acid (ABA) plays a crucial role in the plant's response to both biotic and abiotic stress. Sustainable production of food faces several key challenges, particularly the generation of new varieties with improved water use efficiency and drought tolerance. Different studies have shown the potential applications of Arabidopsis PYR/PYL/RCAR ABA receptors to enhance plant drought resistance. Consequently the functional characterization of orthologous genes in crops holds promise for agriculture. The full set of tomato (Solanum lycopersicum) PYR/PYL/RCAR ABA receptors have been identified here. From the 15 putative tomato ABA receptors, 14 of them could be grouped in three subfamilies that correlated well with corresponding Arabidopsis subfamilies. High levels of expression of PYR/PYL/RCAR genes was found in tomato root, and some genes showed predominant expression in leaf and fruit tissues. Functional characterization of tomato receptors was performed through interaction assays with Arabidopsis and tomato clade A protein phosphatase type 2Cs (PP2Cs) as well as phosphatase inhibition studies. Tomato receptors were able to inhibit the activity of clade A PP2Cs differentially in an ABA-dependent manner, and at least three receptors were sensitive to the ABA agonist quinabactin, which inhibited tomato seed germination. Indeed, the chemical activation of ABA signalling induced by quinabactin was able to activate stress-responsive genes. Both dimeric and monomeric tomato receptors were functional in Arabidopsis plant cells, but only overexpression of monomeric-type receptors conferred enhanced drought resistance. In summary, gene expression analyses, and chemical and transgenic approaches revealed distinct properties of tomato PYR/PYL/RCAR ABA receptors that might have biotechnological implications.

Design and construction of multigenic constructs for plant biotechnology using the GoldenBraid cloning strategy.

GoldenBraid (GB) is an iterative and standardized DNA assembling system specially designed for Multigene Engineering in Plant Synthetic Biology. GB is based on restriction-ligation reactions using type IIS restriction enzymes. GB comprises a collection of standard DNA pieces named "GB parts" and a set of destination plasmids (pDGBs) that incorporate the multipartite assembly of standardized DNA parts. GB reactions are extremely efficient: two transcriptional units (TUs) can be assembled from several basic GBparts in one T-DNA less than 24 h. Moreover, larger assemblies comprising 4-5 TUs are routinely built in less than 2 working weeks. Here we provide a detailed view of the GB methodology. As a practical example, a Bimolecular Fluorescence Complementation construct comprising four TUs in a 12 kb DNA fragment is presented.

GoldenBraid 2.0: a comprehensive DNA assembly framework for plant synthetic biology.

Plant synthetic biology aims to apply engineering principles to plant genetic design. One strategic requirement of plant synthetic biology is the adoption of common standardized technologies that facilitate the construction of increasingly complex multigene structures at the DNA level while enabling the exchange of genetic building blocks among plant bioengineers. Here, we describe GoldenBraid 2.0 (GB2.0), a comprehensive technological framework that aims to foster the exchange of standard DNA parts for plant synthetic biology. GB2.0 relies on the use of type IIS restriction enzymes for DNA assembly and proposes a modular cloning schema with positional notation that resembles the grammar of natural languages. Apart from providing an optimized cloning strategy that generates fully exchangeable genetic elements for multigene engineering, the GB2.0 toolkit offers an evergrowing open collection of DNA parts, including a group of functionally tested, premade genetic modules to build frequently used modules like constitutive and inducible expression cassettes, endogenous gene silencing and protein-protein interaction tools, etc. Use of the GB2.0 framework is facilitated by a number of Web resources that include a publicly available database, tutorials, and a software package that provides in silico simulations and laboratory protocols for GB2.0 part domestication and multigene engineering. In short, GB2.0 provides a framework to exchange both information and physical DNA elements among bioengineers to help implement plant synthetic biology projects.

Combinatorial Analysis of Secretory Immunoglobulin A (sIgA) Expression in Plants.

Delivery of secretory immunoglobulin A (sIgA) to mucosal surfaces as a passive immunotherapy agent is a promising strategy to prevent infectious diseases. Recombinant sIgA production in plants requires the co-expression of four transcriptional units encoding the light chain (LC), heavy chain (HC), joining chain (JC) and secretory component (SC). As a way to optimize sIgA production in plants, we tested the combinatorial expression of 16 versions of a human sIgA against the VP8* rotavirus antigen in Nicotiana benthamiana, using the recently developed GoldenBraid multigene assembly system. Each sIgA version was obtained by combining one of the two types of HC (α1 and α2) with one of the two LC types (k and λ) and linking or not a KDEL peptide to the HC and/or SC. From the analysis of the anti-VP8* activity, it was concluded that those sIgA versions carrying HCα1 and LCλ provided the highest yields. Moreover, ER retention significantly increased antibody production, particularly when the KDEL signal was linked to the SC. Maximum expression levels of 32.5 µg IgA/g fresh weight (FW) were obtained in the best performing combination, with an estimated 33% of it in the form of a secretory complex.